New Mexico Well Data › Sandoval County › Rio Rancho (87144)
Rio Rancho, NM (87144): well depth, water level & drilling cost
✓ 369 OSE records · Sandoval County
Pull every recorded well near a Rio Rancho (87144) address — $49
How deep are wells in and around Rio Rancho (87144), New Mexico?
The median drilled well depth in and around Rio Rancho (87144) is 305 ft, based on 328 wells with recorded depths in the state OSE database. Half fall between 305 ft and 624 ft; 90% are shallower than 1,100 ft.
How much does it cost to drill a well in and around Rio Rancho (87144)?
Applying published per-foot rates to the local median depth of 305 ft: drilling and casing alone typically runs $7,625–$19,825; a complete system including pump, pressure tank, and hookup typically runs $18,300–$30,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Rio Rancho (87144)?
The median static water level is 400 ft below ground surface (middle half of wells: 300 ft–720 ft), from 133 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Sandoval County.
Part of Sandoval County well records.
Method: medians computed from OSE records (OSE Points of Diversion filed as wells (a recorded drilled depth); surface diversions, ditches and acequias excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.