New Mexico Well Data › San Miguel County › Anton Chico (87711)
Anton Chico, NM (87711): well depth, water level & drilling cost
✓ 77 OSE records · San Miguel County
Pull every recorded well near a Anton Chico (87711) address — $49
How deep are wells in and around Anton Chico (87711), New Mexico?
The median drilled well depth in and around Anton Chico (87711) is 340 ft, based on 77 wells with recorded depths in the state OSE database. Half fall between 200 ft and 514 ft; 90% are shallower than 600 ft.
How much does it cost to drill a well in and around Anton Chico (87711)?
Applying published per-foot rates to the local median depth of 340 ft: drilling and casing alone typically runs $8,500–$22,100; a complete system including pump, pressure tank, and hookup typically runs $20,400–$34,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Anton Chico (87711)?
The median static water level is 175 ft below ground surface (middle half of wells: 82 ft–360 ft), from 58 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Miguel County.
Part of San Miguel County well records.
Method: medians computed from OSE records (OSE Points of Diversion filed as wells (a recorded drilled depth); surface diversions, ditches and acequias excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.