⟁ New Mexico Well Data field records · 2026 survey

New Mexico Well Data › Dona Ana County › Las Cruces (88006)

Las Cruces, NM (88006): well depth, water level & drilling cost

✓ 279 OSE records · Dona Ana County

67 ftmedian well depth
55 ft–150 fttypical depth range
36 ftmedian static water level
110 gpmmedian yield (101 tests)

Pull every recorded well near a Las Cruces (88006) address — $49

How deep are wells in and around Las Cruces (88006), New Mexico?

The median drilled well depth in and around Las Cruces (88006) is 67 ft, based on 279 wells with recorded depths in the state OSE database. Half fall between 55 ft and 150 ft; 90% are shallower than 306 ft.

How much does it cost to drill a well in and around Las Cruces (88006)?

Applying published per-foot rates to the local median depth of 67 ft: drilling and casing alone typically runs $1,675–$4,355; a complete system including pump, pressure tank, and hookup typically runs $4,020–$6,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Las Cruces (88006)?

The median static water level is 36 ft below ground surface (middle half of wells: 23 ft–49 ft), from 182 measurements.

Drilled depth distribution

0–50 ft 25 50–100 ft 136 100–150 ft 47 150–200 ft 21 200–300 ft 15 300–400 ft 13 400–600 ft 11 600+ ft 11
Looking at a specific property in Las Cruces (88006)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Las Cruces (88006)

Free. Goes to licensed drillers working Dona Ana County.

Part of Dona Ana County well records.

Method: medians computed from OSE records (OSE Points of Diversion filed as wells (a recorded drilled depth); surface diversions, ditches and acequias excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.