New Mexico Well Data › Lincoln County › San Patricio (88348)
San Patricio, NM (88348): well depth, water level & drilling cost
✓ 249 OSE records · Lincoln County
Pull every recorded well near a San Patricio (88348) address — $49
How deep are wells in and around San Patricio (88348), New Mexico?
The median drilled well depth in and around San Patricio (88348) is 119 ft, based on 249 wells with recorded depths in the state OSE database. Half fall between 80 ft and 160 ft; 90% are shallower than 263 ft.
How much does it cost to drill a well in and around San Patricio (88348)?
Applying published per-foot rates to the local median depth of 119 ft: drilling and casing alone typically runs $2,975–$7,735; a complete system including pump, pressure tank, and hookup typically runs $7,140–$11,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around San Patricio (88348)?
The median static water level is 57 ft below ground surface (middle half of wells: 36 ft–85 ft), from 226 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lincoln County.
Part of Lincoln County well records.
Method: medians computed from OSE records (OSE Points of Diversion filed as wells (a recorded drilled depth); surface diversions, ditches and acequias excluded; depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.